Reabilitação estética anterior em abordagem multidisciplinar: relato de caso / Aesthetic rehabilitation in a multidisciplinary approach: case report

A estética tem um papel importante na aceitação e autoestima das pessoas e, em virtude disso, os pacientes buscam cada dia mais ter um sorriso harmonioso. As reabilitações estéticas devem envolver um planejamento completo, atrelando função e estética, avaliando tamanho dos dentes, perfil e alturas gengivais, altura do sorriso e corredor bucal. Por conta disso, a odontologia nos permite uma série de abordagens terapêuticas diferentes que chegam a resultados satisfatórios para o paciente. Sendo assim, o presente trabalho tem como objetivo descrever um relato de caso de uma paciente com queixa estética do seu sorriso devido à diferentes tonalidades, formas e tamanhos dos dentes. Após anamnese, exame clínico e radiográfico, o plano de tratamento proposto foi de harmonizações periodontal com aumento de coroa e enxerto gengival, além de coroas em cerâmicas de dissilicato de lítio. Dentro desse contexto, mostra-se que uma abordagem multidisciplinar para reabilitação estética e funcional do sorriso é fundamental, a qual nos proporciona equilíbrio e naturalidade entre estética branca e vermelha no resultado do tratamento reabilitador(AU)

Aesthetics plays an important role in people's acceptance and self-esteem and, as a result, patients increasingly seek to have a harmonious smile. Aesthetic rehabilitations must involve a complete planning, linking function and aesthetics, evaluating tooth size, gingival profile and heights, smile height and buccal corridor. Because of this, dentistry allows us a series of different therapeutic approaches that reach satisfactory results for the patient. Therefore, the present work aims to describe a case report of a patient with an aesthetic complaint of her smile due to different shades, shapes and sizes of teeth. After anamnesis, clinical and radiographic examination, the proposed treatment plan was periodontal harmonization with crown augmentation and gingival graft, in addition to lithium disilicate ceramic crowns. Within this context, it is shown that a multidisciplinary approach to the aesthetic and functional rehabilitation of the smile is fundamental, which provides us with balance and naturalness between white and red aesthetics in the result of the rehabilitation treatment(AU)

Reabilitação estética com facetas e coroas cerâmicas em dissilicato de lítio: relato de caso / Aesthetic rehabilitation with ceramic facets and crowns in lithium disilicate: case report

Introdução: A procura pela estética do sorriso é crescente na Odontologia, pois, muitas vezes um sorriso alinhado e periodonto saudável não são o bastante. A cerâmica odontológica apresenta-se como uma ótima possibilidade restauradora, visto o avanço das técnicas de adesão entre o substrato dentário e as cerâmicas, torna-se mais previsível o resultado com este tipo de reabilitação. Objetivo: O presente artigo tem como objetivo descrever um caso clínico com envolvimento de diversos níveis de desgaste dentário para reabilitação estética com cerâmica de dissilicato de lítio. Relato de caso: Paciente 36 anos, gênero feminino, apresentava insatisfação com seu sorriso devido a forma e a alteração de cor dos seus dentes superiores anteriores e pré-molares. O plano de tratamento consistiu em realizar a troca da coroa metalocerâmica por coroa total cerâmica da unidade 14, coroa total cerâmica nas unidades 11, 21 e 22, facetas cerâmicas nas unidades 15, 13, 12, 23, 24 e 25, osteotomia e gengivoplastia das regiões de 2º prémolar superior esquerdo ao 2º pré-molar superior direito, clareamento dental caseiro da arcada inferior e placa oclusal superior de proteção. O material de escolha para a resolução do caso clínico foi a cerâmica vítrea reforçada à base de dissilicato de lítio, pois, possui um índice de refração de luz semelhante à estrutura dentária, sem interferência significativa da translucidez, além de ser passível de cimentação adesiva por se tratar de uma cerâmica ácido sensível e o tamanho do cristal e a sua disposição favorecem o aumento das propriedades mecânicas da restauração. Conclusão: O plano de tratamento realizado permitiu o restabelecimento da função e estética, com reprodução das características dos dentes naturais e promoção da jovialidade e da harmonia no sorriso(AU)

Introduction:The demand for smile aesthetics is growing in Dentistry, because, often a smile aligned and healthy periodontium are not enough. Dental ceramics, presented as an excellent restorative possibility, since the advancement of adhesion techniques between the dental substrate and the ceramics, becomes more predictable the result with this type of rehabilitation. Objective: This article aims to describe a clinical case involving several levels of dental wear for aesthetic rehabilitation with ceramics. Case Report: A 36-year-old female patient presented dissatisfaction with her smile due to the shape and color alteration of her anterior and premolar upper teeth. The treatment plan consisted of exchanging the metal-ceramic crown for the total ceramic crown of unit 14, total ceramic crown in units 11, 21 and 22, ceramic veneers in units 15, 13, 12, 23, 24 and 25, osteotomy and gingivoplasty of the regions from 2nd left upper premolar to 2nd right upper premolar, home tooth whitening of the lower arch and upper occlusal plate of protection. The material of choice for the resolution of the clinical case was the glass ceramic reinforced on the basis of lithium disilicate because it has a refractive index of light similar to the dental structure, without significant interference of translucency, besides being liable to adhesive cementation because it is a sensitive acid ceramic and the size of the crystal and its disposition favor the increase of the mechanical properties of the restoration. Conclusion: The treatment plan performed allowed the restoration of function and aesthetics, with reproduction of the characteristics of natural teeth and promotion of joviality and harmony in the smile(AU)

Estabilidade de cor de diferentes sistemas cerâmicos fresados no CAD/CAM e polidos com diferentes métodos / Color stability of different ceramic systems milled in CAD/CAM and polished with different methods

A descoloração ou perda de translucidez dos materiais cerâmicos usados em odontologia ainda hoje é um problema, especialmente pelo comprometimento estético. Com o objetivo de comparar a estabilidade de cor, blocos de dissilicato de lítio (IPS e.max CAD HT) e de silicato de lítio reforçado com zircônia (Vita Suprinity HT) fresados no desenho de um disco com dimensões de 1,5 × 7 × 12 mm3 (n = 120) foram preparados usando 3 procedimentos de acabamento de superfície: glaze, polimento mecânico e coloração externa e glaze. Em seguida, cada grupo foi dividido em 2 subgrupos de armazenamento, chá preto e café (n = 10/grupo). As mensurações de cor foram medidas com espectrofotômetro (VITA Easyshade) no estágio inicial e após 1 semana, 2 semanas, 1 mês, 2 meses de armazenamento. As alterações de cor (ΔE) foram calculadas e analisadas estatisticamente usando ANOVA (α < 0,05). Observamos que, para ambos os materiais cerâmicos, o procedimento de glaze apresentou valores de mudança de cor estatisticamente menores do que os outros grupos (p < 0,05) após o armazenamento em ambas as bebidas. Os grupos de dissilicato de lítio apresentaram valores de alteração de cor estatisticamente menores em relação aos grupos de silicato de lítio reforçados com zircônia. Conclui-se que, o glaze sozinho levou a uma maior estabilidade de cor em relação ao polimento mecânico e coloração externa o dissilicato de lítio apresentou maior estabilidade de cor em comparação com o silicato de lítio reforçada com zircônia.

The discoloration or loss of translucency of ceramic materials used in dentistry is still a problem today, especially due to aesthetic compromise. In order to compare color stability, lithium disilicate (IPS e.max CAD HT) and zirconia-reinforced lithium silicate (Vita Suprinity HT) blocks were milled into a disc design with dimensions of 1.5 × 7 × 12 mm3 (n = 120). The specimens were prepared using 3 surface finishing procedures: glaze, mechanical polishing and external staining and glaze. Then, each group was divided into 2 storage subgroups, black tea and coffee (n = 10/group). Color measurements were measured with a spectrophotometer (VITA Easyshade) at the initial stage and after 1 week, 2 weeks, 1 month, 2 months of storage. Color changes (ΔE) were calculated and statistically analyzed using ANOVA (α < 0.05). We observed that, for both ceramic materials, the glaze procedure presented statistically lower color change values ​​than the other groups (p < 0.05) after storage in both beverages. The lithium disilicate groups showed statistically lower color change values ​​than the zirconia-reinforced lithium silicate groups. It is concluded that, glaze alone led to greater color stability compared to mechanical polishing and external staining, lithium disilicate showed greater color stability compared to zirconia-reinforced lithium silicate.

Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics / 北京大学学报(医学版)

OBJECTIVE@#To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application.@*METHODS@#Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05).@*RESULTS@#The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05).@*CONCLUSION@#The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.

Color stability and degree of conversion of amine-free dual cured resin cement used with two different translucencies of lithium disilicate ceramics / Estabilidade de cor e grau de conversão de cimento resinoso dual sem amina usado com duas translucidezes diferentes de cerâmica de dissilicato de lítio

Objective: The present study aims to evaluate the color stability and degree of conversion of amine-free dual cured resin cement compared to light cured and amine-containing dual cured resin cements used with two different translucencies of thin esthetic restorations. Material and Methods: A total of 120 specimens were prepared for color stability testing (n=60). The specimens were divided into three main groups according to the resin cement type. Group 1: amine-free dual cured, Group 2: light cured, Group 3: amine-containing dual cured. Each group was further subdivided according to the ceramic translucency into two subgroups: high and low translucency. Color stability was assessed by a spectrophotometer before and after thermal aging. For the degree of conversion assessment (n=60), Fourier transform infrared spectroscopy was used at three different time intervals. Statistical analysis was performed using multi-factorial ANOVA, followed by one-way ANOVA with Bonferroni correction. Results: Amine-containing resin cement showed significantly higher ΔEab and ΔE00in both translucencies (4.5±0.3, 3.5±0.3 respectively for high translucency ceramic and 3.8±0.4, 3.0±0.3 respectively for low translucency) than the other tested cements (p<0.001). The highest degree of conversion (DC) was shown after 2 weeks by the amine-free dual cured resin cement (86.27±0.74). Conclusion: Amine-free dual cured resin cement can be an alternative to light cured one for cementation of thin veneers since it showed comparable color stability and high degree of conversion (AU)

Objetivo: O presente estudo tem como objetivo avaliar a estabilidade de cor e o grau de conversão do cimento resinoso dual sem amina em comparação com cimentos resinosos fotopolimerizáveis contendo amina usados com duas translucidezes diferentes em restaurações estéticas definitivas. Material e Métodos: Um total de 120 espécimes foram preparados para teste de estabilidade de cor (n=60). Os espécimes foram divididos em três grupos principais de acordo com o tipo de cimento resinoso. Grupo 1: polimerização dupla sem amina, Grupo 2: fotopolimerização, Grupo 3: polimerização dupla contendo amina. Cada grupo foi ainda subdividido de acordo com a translucidez da cerâmica em dois subgrupos: alta e baixa translucidez. A estabilidade da cor foi avaliada por um espectrofotômetro antes e após o envelhecimento térmico. Para a avaliação do grau de conversão (n=60), a espectroscopia de infravermelho com transformada de Fourier foi usada em três intervalos de tempo diferentes. A análise estatística foi realizada usando ANOVA multifatorial, seguida de ANOVA um faot com correção de Bonferroni. Resultados: O cimento resinoso contendo amina apresentou ΔEab e ΔE00 significativamente maiores em ambas as translucidezes (4,5±0,3, 3,5±0,3 respectivamente para cerâmica de alta translucidez e 3,8±0,4, 3,0±0,3 respectivamente para baixa translucidez) do que os outros cimentos testados (p< 0,001). O maior grau de conversão (DC) foi mostrado após 2 semanas pelo cimento resinoso dual sem amina (86,27±0,74). Conclusão: O cimento resinoso dual sem amina pode ser uma alternativa ao cimento polimerizável na restauração de facetas finas, uma vez que apresentou estabilidade de cor comparável e alto grau de conversão. (AU).

Lithium Intoxication as a cause of reversible dementia mimicking FDG PET features of Alzheimer's disease / Intoxicação por lítio como causa de demência rapidamente progressiva: um relato de caso e revisão da literatura

ABSTRACT. Rapidly progressive dementia (RPD) is a rare neurological disorder. Drug toxicity is among the differential diagnoses, including the use of lithium, in which an overdosage might cause cognitive dysfunction. Clinical suspicion, laboratory confirmation, and drug interruption are key points in the management of lithium intoxication. We described a 66-year-old female patient under treatment with lithium who developed an RPD associated with parkinsonian symptoms. 18F-fluorodeoxyglucose positron emission tomography/computed tomography (18F-FDG PET/CT) showed an "Alzheimer-like" pattern, while cerebrospinal fluid biomarkers for the disease were negative. There was a significant clinical and radiological improvement after lithium interruption. Lithium intoxication is a potentially reversible cause of RPD, as demonstrated in this case report. Drug discontinuation should be considered even in patients with normal levels of this metal, if cognitive impairment is detected. 18F-FDG PET/CT images may show an "Alzheimer-like" image pattern in acute intoxication and are useful for monitoring these patients.

RESUMO. Demência rapidamente progressiva é uma condição rara, cujos diagnósticos diferenciais incluem intoxicação por drogas como lítio, podendo causar importante disfunção cognitiva. A suspeita clínica, a confirmação laboratorial e a interrupção do uso medicamentoso são elementos fundamentais em seu diagnóstico e manejo. Trata-se de paciente feminina, de 66 anos de idade, que apresentou quadro demencial após intoxicação por lítio. Tal quadro foi acompanhado de sintomas parkinsonianos, além de Tomografia por Emissão de Pósitrons com 18F-Fluodeoxiglicose (18F-FDG PET/CT) compatível com padrão "Alzheimer-like". Houve melhora objetiva de parâmetros clínicos e imaginológicos após a interrupção do uso medicamentoso. A intoxicação por lítio é uma causa potencialmente reversível de demência rapidamente progressiva. A descontinuação da droga deve ser considerada também em pacientes com níveis normais do metal no sangue se alterações cognitivas forem encontradas. Imagens 18F-FDG PET/CT podem demonstrar achados sugestivos de doença de Alzheimer na intoxicação aguda e parecem ser um método útil no seguimento.

Lithium as pre-radioablative treatment of Graves’ Disease Complicated by Thyroid Storm and Methimazole-induced Agranulocytosis: A case report

@#Thyroid storm and thionamide-induced agranulocytosis are both rare and serious medical emergencies. We report a case of a patient in which these two rare events simultaneously occurred. A 33-year-old male, maintained on Methimazole for Graves’ Disease, presented with fever, throat pain, and uncontrolled thyrotoxic symptoms. Methimazole was promptly discontinued. Thyroid storm was alternatively treated with lithium, hydrocortisone, and propranolol. Agranulocytosis was managed supportively with GCSF and empiric antibiotics. Lithium was maintained until after radioablation. When thionamides are contraindicated, lithium is a viable option for the acute management of thyroid storm and a bridge to definitive therapy.

Biomineralization of lithium nanoparticles by Li-resistant Pseudomonas rodhesiae isolated from the Atacama salt flat

BACKGROUND: The Atacama salt flat is located in northern Chile, at 2300 m above sea level, and has a high concentration of lithium, being one of the main extraction sites in the world. The effect of lithium on microorganism communities inhabiting environments with high concentrations of this metal has been scarcely studied. A few works have studied the microorganisms present in lithium-rich salt flats (Uyuni and Hombre Muerto in Bolivia and Argentina, respectively). Nanocrystals formation through biological mineralization has been described as an alternative for microorganisms living in metal-rich environments to cope with metal ions. However, bacterial lithium biomineralization of lithium nanostructures has not been published to date. In the present work, we studied lithium-rich soils of the Atacama salt flat and reported for the first time the biological synthesis of Li nanoparticles. RESULTS: Bacterial communities were evaluated and a high abundance of Cellulomonas, Arcticibacter, Mucilaginibacter, and Pseudomonas were determined. Three lithium resistant strains corresponding to Pseudomonas rodhesiae, Planomicrobium koreense, and Pseudomonas sp. were isolated (MIC > 700 mM). High levels of S2− were detected in the headspace of P. rodhesiae and Pseudomonas sp. cultures exposed to cysteine. Accordingly, biomineralization of lithium sulfide-containing nanomaterials was determined in P. rodhesiae exposed to lithium salts and cysteine. Transmission electron microscopy (TEM) analysis of ultrathin sections of P. rodhesiae cells biomineralizing lithium revealed the presence of nanometric materials. Lithium sulfide-containing nanomaterials were purified, and their size and shape determined by dynamic light scattering and TEM. Spherical nanoparticles with an average size < 40 nm and a hydro-dynamic size ~ 44.62 nm were determined. CONCLUSIONS: We characterized the bacterial communities inhabiting Li-rich extreme environments and reported for the first time the biomineralization of Li-containing nanomaterials by Li-resistant bacteria. The biosynthesis method described in this report could be used to recover lithium from waste batteries and thus provide a solution to the accumulation of batteries.

Studies on lithium in the environment and its effects on the central nervous system / 中华预防医学杂志

This paper introduces the distribution of global lithium resources and absorption, distribution, metabolism and excretion of lithium in the human body, discussing the positive effect of lithium in the environment on the nervous system and its neuroprotective mechanism. The tiny amounts of lithium that enter the body through the food chain have been linked to beneficial health effects, such as improved cognition and reduced depression and violence. However, the safe dose range of lithium is narrow, and the health effects of drinking high concentrations of lithium water in high-lithium areas are unclear. It is necessary to study the health effects and mechanisms of different doses of lithium, especially high concentrations of lithium in the environment.

Manía unipolar: un ineludible diagnóstico: revisión de la literatura a propósito de un caso / Unipolar mania: an unavoidable diagnosis: case report and literature review

Resumen Introducción: La manía unipolar (MU) es un trastorno que se comporta de manera distinta al trastorno bipolar-I (TB-I), sin embargo, no es considerado como una entidad independiente por los manuales diagnósticos vigentes, sino que es incluido dentro del diagnóstico de TB-I. Caso clínico: Hombre de 21 años presenta cuadro clínico de 3 meses de evolución caracterizado por ánimo exaltado y síntomas psicóticos congruentes al estado de ánimo. El paciente niega episodios depresivos previos. Se instaura tratamiento con litio y aripiprazol que resulta satisfactorio, sin presentar recurrencias tras 5 años de seguimiento. Revisión de la literatura y discusión: Los manuales diagnósticos describen que para diagnosticar TB-I no se requiere la presencia de un episodio depresivo mayor, lo que implica que pacientes con MU quedan dentro de la misma categoría diagnóstica que pacientes con TB-I. Diferencias entre MU y TB-I han sido demostradas en estudios epidemiológicos, clínicos y genéticos, por lo tanto, incluir pacientes heterogéneos dentro de la misma categoría podría dificultar la interpretación de estudios y limitar los avances en el conocimiento de ambos trastornos. Conclusión: De la revisión de la literatura se sugiere que la MU debe ser reconocida como un diagnóstico independiente. A pesar de su baja prevalencia, al validarlo como tal, en un futuro podríamos contar con mayor cantidad y mejor calidad de datos sobre este. De esta forma se podrá definir de manera más concreta sus características distintivas, y por consiguiente mejorar el abordaje clínico de estos pacientes.

Introduction: Unipolar mania (UM) is a disorder that behaves differently from bipolar-I disorder (BP-I), however, it is not considered an independent entity by current diagnostic manuals, but rather included within the diagnosis of BP-I. Case report: A 21-year-old man presented a 3-month-long episode characterized by exalted mood and mood-congruent psychotic symptoms. The patient denies previous depressive episodes. Treatment with lithium and aripiprazole was established, which was satisfactory, not showing recurrence after 5 years of follow-up. Literature review and discussion: Diagnostic manuals describe that to diagnose BP-I the presence of a major depressive episode is not required, which implies that patients with UM fall into the same diagnostic category as patients with BP-I. Differences between UM and BP-I have been demonstrated in epidemiological, clinical, and genetic studies, therefore, including heterogeneous patients within the same category could hinder the interpretation of studies and limit advances in the knowledge of both disorders. Conclusion: Based on the literature review, it is suggested that UM should be recognized as an independent diagnosis. Despite its low prevalence, by validating it as such, in the future we could have more and better-quality data about this diagnosis. In this way, its distinctive characteristics can be defined more concretely, and therefore improve the clinical approach of these patients.

Lithium, an old friend and a forgotten enemy

SUMMARY INTRODUCTION: Nephrogenic diabetes insipidus (DI) is a polyuric and polydipsic syndrome and can have multiple causing factors. CASE DESCRIPTION: A 69-year-old woman with bipolar disorder medicated with lithium 400mg for 12 years on a daily basis. The patient was admitted, after psychiatric decompensation, with hypernatremia unresponsive to hypotonic iv fluids. The diagnosis of DI was made with high plasmatic osmolality measurement, low urine osmolality, and high levels of antidiuretic hormone. Full clinical recovery was possible with lithium suspension, hydration, and chlorthalidone. DISCUSSION: Although frequently used in the past, Lithium (Li) is nowadays rarely used in clinical practice for prolonged treatments because of its potentially devastating side effects. Clinicians must be aware of those side effects in order to prevent organ damage, mainly in patients with severe bipolar disease and precarious response to alternative treatments.

RESUMO INTRODUÇÃO: O diabetes insípido nefrogênico faz parte das síndromes poliúricas polidipsicas e pode ter múltiplos fatores causais. CASO CLÍNICO: Mulher de 69 anos, com doença bipolar medicada com lítio 400 mg por dia durante 12 anos. A doente foi internada, após descompensação da doença bipolar, por hipernatremia não responsiva a fluidoterapia hipotônica endovenosa. O diagnóstico de DI foi realizado com base na elevação da osmolaridade plasmática, baixa osmolaridade urinária e níveis elevados de hormona antidiurética. Verificou-se recuperação clínica completa com suspensão do lítio, hidratação e clorotalidona. DISCUSSÃO: Apesar do seu uso frequente no passado, o lítio (Li) é hoje em dia raramente utilizado na prática clínica por períodos prolongados pelos seus efeitos potencialmente devastadores. Os médicos devem ter em conta os potenciais efeitos secundários de forma a prevenir lesão de órgão em doentes com doença bipolar de difícil controle com outra terapêutica.

Informe diário de evidências COVID-19: busca realizada em 10 de julho de 2020 / COVID-19 daily evidence report: search conducted on July 10, 2020

O Informe Diário de Evidências é uma produção do Ministério da Saúde que tem como objetivo acompanhar diariamente as publicações científicas sobre tratamento farmacológico e vacinas para a COVID-19. Dessa forma, são realizadas buscas estruturadas em bases de dados biomédicas, referentes ao dia anterior desse informe. Não são incluídos estudos pré-clínicos (in vitro, in vivo, in silico). A frequência dos estudos é demonstrada de acordo com a sua classificação metodológica (revisões sistemáticas, ensaios clínicos randomizados, coortes, entre outros). Para cada estudo é apresentado um resumo com avaliação da qualidade metodológica. Essa avaliação tem por finalidade identificar o grau de certeza/confiança ou o risco de viés de cada estudo. Para tal, são utilizadas ferramentas já validadas e consagradas na literatura científica, na área de saúde baseada em evidências. Cabe ressaltar que o documento tem caráter informativo e não representa uma recomendação oficial do Ministério da Saúde sobre a temática. Foram encontrados 20 artigos e 16 protocolos.

Effect of commercial silanes on bond strength of resin cement to lithium disilicate ceramic / Efeito de silanos comerciais na resistência de união do cimento resinoso à cerâmica de dissilicato de lítio

The aim of this study was to evaluate the effect of different commercial silanes on microshear bond strength of resin cement to lithium disilicate ceramic. Twenty ceramic samples with 10 mm in length, 10 mm wide and 3 mm in thickness were fabricated, etched with 10% hydrofluoric acid for 20 seconds, and divided into 5 groups, according to the commercial silane applied: G1- RelyX Ceramic Primer (3M ESPE), G2- Angelus Silane, G3- Prosil (FGM), G4- Dentsply Silane (Dentsply) and G5- Bis-Silane (Bisco). Silanes were applied in accordance to manufacturers' recommendations. Addition silicone molds with 1 mm in thickness, 10 mm in diameter and 3 perforations with 1 mm in diameter each one, were placed on ceramic and filled with the resin cement RelyX ARC (3M ESPE) in all groups. Light activation was performed with LED Bluephase G2 (Ivoclar Vivadent) at 1200 mW/cm2, for 30 seconds. Samples were maintained in 100% humidity at 37°C for 24 hours and submitted to microshear test. The data (MPa) were submitted to one-way ANOVA and Tukey test (α=0.05). The results obtained for each group were: G1: 22.39±2.99; G2: 23.35±4.08; G3: 26.05±5.46; G4: 18.56±4.09; G5: 25.26±4.10. Statistical analysis showed significantly lower microshear bond strength for G4. Fracture pattern analysis showed predominance of adhesive failures in G1 and G2. G3 and G5 presented higher percentage of cohesive failures in ceramic, and G4 showed mixed, adhesive and cohesive fractures with similar percentages. It was concluded that different silanes showed influence on the lithium disilicate ceramic ­ resin cement bond strength

O objetivo neste estudo foi avaliar o efeito de diferentes silanos comerciais na resistência de união ao microcisalhamento do cimento resinoso à cerâmica de dissilicato de lítio. Foram confeccionadas 20 amostras de cerâmica (10mm de comprimento, 10mm de largura e 3mm de espessura), condicionadas com ácido fluorídrico a 10% por 20 segundos e divididas em 5 grupos, de acordo com o silano aplicado: G1- RelyX Ceramic Primer (3M ESPE), G2- Silano Angelus, G3-Prosil (FGM), G4- Silano Dentsply e G5-Bis-Silane (Bisco). Matrizes de silicone por adição (1 mm de espessura, 10 mm de diâmetro e 3 perfurações com 1 mm de diâmetro) foram colocadas sobre a cerâmica e preenchidas com cimento resinoso RelyX ARC (3M ESPE). A fotoativação foi realizada com LED Bluephase G2 (Ivoclar Vivadent) a 1200 mW/cm2, por 30 segundos. As amostras foram mantidas em 100% de umidade a 37°C por 24 horas e submetidas ao teste de microcisalhamento. Os dados (MPa) (G1: 22,39+2,99; G2: 23,35+4,08; G3: 26,05+5,46; G4: 18,56+ 4,09; G5: 25,26+4,10) foram submetidos a análise de variância e ao teste de Tukey (p<0,05). A análise estatística mostrou valor de resistência de união significantemente menor para G4. A análise do padrão de fratura mostrou predominância de falha adesiva para G1 e G2. G3 e G5 apresentaram maior porcentagem de falha coesiva em cerâmica, e o G4 apresentou fraturas mista, adesiva e coesiva em igual porcentagem. Concluiu-se que os diferentes silanos apresentaram influência na resistência de união do cimento resinoso à cerâmica de dissilicato de lítio

Desempenho clínico de coroas monolíticas posteriores de cerâmica infiltrada por polímero: ensaio clínico controlado e randomizado duplo cego / Clinical performance of posterior monolithic polymer-infiltrated ceramic crowns: double-blind randomized controlled clinical trial

Objetivo: avaliar por meio de um ensaio clínico controlado, randomizado e duplo-cego, o desempenho clínico de coroas monolíticas unitárias posteriores confeccionadas em cerâmica infiltrada por polímero, bem como o impacto da reabilitação na satisfação estética e qualidade de vida dos pacientes. Materiais e Métodos: Um total de 20 pacientes que receberam 36 coroas foram incluídos neste estudo. Todos os pacientes assinaram o termo de consentimento livre e esclarecido (TCLE). Os dentes sob reabilitação foram alocados por meio de um sorteio simples entre os grupos: Grupo Controle: (LD- dissilicato de lítio) e grupo Experimental (PIC -Vita Enamic/Vita Zahnfabrik). Registros fotográficos, radiográficos e informações clínicas foram coletados antes, durante e após a reabilitação. As coroas foram avaliadas quanto à taxa de sobrevida clínica (Critérios de USPSH modificados), satisfação estética (escala visual analógica- EVA), qualidade de vida (Oral Impacts on Daily Performances -OIDP), e tipo de falhas (biológicas e técnicas). A coleta de dados foi realizada por um único examinador calibrado e cego para o tipo de material, nos tempos de seguimento T0 (antes do início do tratamento), T1 (1 mês), T2 (6 meses) e T3 (12 meses). O OIDP e os critérios de USPHS foram analisados descritivamente. A satisfação estética foi analisada com MannWhitney/Teste de Friedman/ pós-testes de Wilcoxon. A análise de sobrevivência foi feita usando Kaplan-Meier seguido do teste de log-rank. O nível de significância foi estabelecido em (5%). Resultados: 36 coroas foram colocadas em 20 pacientes com uma média de idade de 47.17 anos (±13,91), sendo 22 (56,4%) coroas do grupo controle (LD) e 14 (35,9%) para o grupo experimental (PIC). A análise de Kaplan-Meier revelou uma taxa de sobrevida de 83,5% para PIC e de 86,2% para LD sem diferenças significativas entre eles (P>0.05). Quatro falhas foram registradas, 2 em cada grupo, sendo dois descolamentos, uma de PIC após 1 mês e uma de LD após 6meses. Houve também uma fratura do dente (LD) e mobilidade grau III (PIC) após 12 meses de acompanhamento. Não houve diferença significativa na satisfação estética, entre o grupo controle e grupo experimental (Mann-Whitney - P>0.05). A satisfação estética foi significativamente maior após 1(T1), 6(T2) e 12(T3) meses quando comparado ao baseline (T0) (Teste de Friedman - P<0.05). A reabilitação com coroas unitárias impactou positivamente na qualidade de vida dos pacientes. Conclusão: Este estudo demonstra que coroas monolíticas unitárias de PIC apresentaram desempenho clínico, estético e um impacto positivo na qualidade de vida dos pacientes após 12 meses, similar ao LD (AU).

Objective: To evaluate, through a controlled, randomized and double-blind clinical trial, the clinical performance of posterior single monolithic crowns made ceramic infiltrated polymer, as well as the impact of rehabilitation on patients' aesthetic satisfaction and quality of life. Materials and Methods: A total of 20 patients who received 36 crowns were included in this study. All patients signed an informed consent form. The teeth under rehabilitation were allocated using a simple draw between the groups: Control Group: (LD- lithium disilicate) and Experimental group (PIC -Vita Enamic). Photographic, radiographic, and clinical information records were collected before, during, and after rehabilitation. The crowns were assessed for clinical survival rate (modified USPSH criteria), aesthetic satisfaction (visual analog scale - VAS), quality of life (Oral Impacts on Daily Performances - OIDP), and type of failures (biological and technical). Data collection was performed by a single examiner calibrated and blinded to the type of material, at the follow-up times T0 (before the start of treatment), T1 (1 month), T2 (6 months), and T3 (12 months). The OIDP and USPHS criteria were analyzed descriptively. Aesthetic satisfaction was analyzed with the Man-Whitney/Friedman test/Wilcoxon post-tests. Survival analysis was performed using Kaplan-Meier followed by the log-rank test. The level of significance was set at (5%). Results: 36 crowns were placed on 20 patients (17 women and 3 men) with a mean age of 47.17 years (± 13.91), with 22 (56.4%) crowns from the control group (LD) and 14 (35.9%) for the group experimental (PIC). The Kaplan-Meier analysis revealed a survival rate of 83.5% for PIC and 86.2% for LD with no significant differences between them (P>0.05). Four failures were recorded, 2 in each group, two detachments after 1(PIC) and 6 months (LD), a tooth fracture (LD), and grade III mobility after (PIC) 12 months of follow-up. There was no significant difference in aesthetic satisfaction between the control group and the experimental group (Mann-Whitney, P>0.05). Aesthetic satisfaction was significantly higher after 1 (T1), 6 (T2), and 12 (T3) months when compared to baseline (T0) (Friedman test - P <0.05). Rehabilitation with single crowns had a positive impact on patients' quality of life. Conclusion: This study demonstrates that single monolithic crowns of PIC presented a good clinical, aesthetic performance and a positive impact on patients' quality of life after 12 months, similarly to PIC (AU).

Association between lithium in tap water and suicide mortality rates in Miyazaki Prefecture

BACKGROUND@#Most studies have reported that suicide mortality rates are negatively associated with lithium levels in tap water; however, a few studies showed either no association or a positive association. Thus, the association between suicide mortality and lithium levels in tap water remains controversial. To clarify the association, our study evaluated the association between lithium levels in tap water and suicide mortality rates in Miyazaki Prefecture of Japan, after adjusting for confounding factors.@*METHODS@#We measured lithium levels in tap water across the 26 municipalities of Miyazaki Prefecture in Japan. We examined the standardized mortality ratio (SMR) for suicide in each municipality and used the data as the average suicide SMRs over 5 years (2009-2013). Weighted least-squares regression analysis, adjusted for the size of each municipality's population, was used to investigate the association between lithium levels in tap water and suicide SMRs. In addition to a crude model, in an adjusted model, potential confounding factors (proportion of elderly people, proportion of one-person households, annual marriage rate, annual mean income, unemployment rate, the density of medical doctors per 100,000 people, annual total rainfall, and proportion of people with a college education or higher) were added as covariates.@*RESULTS@#We showed that male and female suicide SMRs were not associated with lithium levels in tap water in Miyazaki Prefecture. After adjusting for confounders, male suicide SMRs were significantly and positively associated with the proportion of elderly people in the population and annual total rainfall, and female suicide SMRs were associated with the proportion of elderly people in the population.@*CONCLUSIONS@#No association between lithium levels in tap water and suicide mortality rates was found in Miyazaki Prefecture.

Influence of zirconia and lithium disilicate tooth- or implant-supported crowns on wear of antagonistic and adjacent teeth

PURPOSE: To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent teeth.MATERIALS AND METHODS: A mandibular left first molar (#36) with adjacent human teeth (mandibular left second premolar: #35, mandibular left second molar: #37) and antagonistic human teeth (maxillary left second premolar: #25, maxillary left first molar: #26, maxillary left second molar: #27) was prepared simulating a section of the jaw. Samples were made with extracted human molars (Reference), crowned implants (Implant), or crowned resin tooth analogues (Tooth). Crowns (tooth #36; n = 16/material) were milled from lithium-disilicate (Li, IPS e.max CAD) or 3Y-TZP zirconia (Zr, IPS e.max ZirCAD, both Ivoclar Vivadent). Thermal cycling and mechanical loading (TCML) in the chewing simulator were applied simulating 15 years of clinical service. Wear traces were analyzed (frequency [n], depth [µm]) and evaluated using scanning electron pictures. Wear results were compared by one-way-ANOVA and post-hoc-Bonferroni (α = 0.05).RESULTS: After TCML, no visible wear traces were found on Zr. Li showed more wear traces (n = 30–31) than the reference (n = 21). Antagonistic teeth #26 showed more wear traces in contact to both ceramics (n = 27–29) than to the reference (n = 21). Strong wear traces (> 350 µm) on antagonists and their adjacent teeth were found only in crowned groups. Abutment type influenced number and depth of wear facets on the antagonistic and adjacent teeth.CONCLUSION: The clinically relevant model with human antagonistic and adjacent teeth allowed for a limited comparison of the wear situation. The total number of wear traces and strong wear on crowns, antagonistic and adjacent teeth were influenced by crown material.

Determinação de baixas concentrações de lítio em águas de abastecimento público por cromatografia de íons: validação de método / Determination of low concentrations of lithium in public water supply by the ion chromatography: method validation

Esta nota apresenta a validação de um método para realizar a determinação de lítio em concentrações menores do que 40 µg L­1 em amostras de águas de abastecimento público, utilizando­se cromatografia de íons e calibração externa, com a curva analítica obtida por regressão linear (mínimos quadrados ordinários). O método é seletivo, e apresenta limite de detecção igual a 1,0 µg L­1e limite de quantificação igual a 2,0 µg L­1.Os ensaios de recuperação em três níveis de concentração apresentaram resultados entre 99,4 e 101,9%. Na avaliação da precisão nos mesmos três níveis de concentração, os coeficientes de variação exibiram valores entre 1,1 e 4,0%. (AU)

This note presents the validation of a method for determining the lithium at concentrations less than 40 µg L­1 in the public water supply, by using the ion chromatography and external calibration, and the analytical curve was obtained by the linear regression (ordinary least squares). The employed method is selective, showing the detection limit equal to 1.0 µg L­1 and the quantification limit equal to 2.0 µg L­1. Recovery tests in three concentration levels presented results from 99.4 to 101.9%. On the precision evaluation in the same three concentration levels, the coefficients of variation exhibited values between 1.1 and 4.0%. (AU)

Determinação de baixas concentrações de lítio em águas de abastecimento público por cromatografia de íons: validação de método / Determination of low concentrations of lithium in public water supply by the ion chromatography: method validation

Esta nota apresenta a validação de um método para realizar a determinação de lítio em concentrações menores do que 40 μg L-1 em amostras de águas de abastecimento público, utilizandose cromatografia de íons e calibração externa, com a curva analítica obtida por regressão linear (mínimos quadrados ordinários). O método é seletivo, e apresenta limite de detecção igual a 1,0 μg L-1 e limite de quantificação igual a 2,0 μg L-1 . Os ensaios de recuperação em três níveis de concentração apresentaram resultados entre 99,4 e 101,9%. Na avaliação da precisão nos mesmos três níveis de concentração, os coeficientes de variação exibiram valores entre 1,1 e 4,0%.

This note presents the validation of a method for determining the lithium at concentrations less than 40 μg L-1 in the public water supply, by using the ion chromatography and external calibration, and the analytical curve was obtained by the linear regression (ordinary least squares). The employed method is selective, showing the detection limit equal to 1.0 μg L-1 and the quantification limit equal to 2.0 μg L-1 . Recovery tests in three concentration levels presented results from 99.4 to 101.9%. On the precision evaluation in the same three concentration levels, the coefficients of variation exhibited values between 1.1 and 4.0%.